Posted by David on September 25, 1999 at 02:55:24:
In Reply to: Advice posted by Frank on September 25, 1999 at 00:44:33:
Adjust the idle mixture with the idle mixture screw. You'll need to drill the brass plug, pressed in over it and yank it out with a sheet metal screw attached to a slide hammer. You'll find that plug, up high on the right side of the carb, about where the mouth enters the air box. Usually Suzuki applies a splash of white paint over the brass plug. With the engine warmed up and idling, turn the screw out until you achieve the highest idle. At this point back off the id-
le speed stop screw to keep the idle to a leisurely gate.
I hope that I was of some help.